Linux version 2.6.33.7-pclos6.bfs (root@localhost.localdomain) (gcc version 4.4.1 (GCC) ) #1 SMP PREEMPT Thu Oct 21 22:42:28 CDT 2010 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000bfff0000 (usable) BIOS-e820: 00000000bfff0000 - 00000000bfff3000 (ACPI NVS) BIOS-e820: 00000000bfff3000 - 00000000c0000000 (ACPI data) BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! DMI 2.3 present. last_pfn = 0xbfff0 max_arch_pfn = 0x100000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-CDFFF write-protect CE000-EFFFF uncachable F0000-FFFFF write-through MTRR variable ranges enabled: 0 base 000000000 mask F80000000 write-back 1 base 080000000 mask FC0000000 write-back 2 disabled 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled initial memory mapped : 0 - 00c00000 found SMP MP-table at [c00f4e10] f4e10 init_memory_mapping: 0000000000000000-00000000373fe000 0000000000 - 0000400000 page 4k 0000400000 - 0037000000 page 2M 0037000000 - 00373fe000 page 4k kernel direct mapping tables up to 373fe000 @ 7000-d000 RAMDISK: 37980000 - 37fef04f Allocated new RAMDISK: 0068f000 - 00cfe04f Move RAMDISK from 0000000037980000 - 0000000037fef04e to 0068f000 - 00cfe04e ACPI: RSDP 000f67d0 00014 (v00 GBT ) ACPI: RSDT bfff3040 00038 (v01 GBT AWRDACPI 42302E31 AWRD 01010101) ACPI: FACP bfff30c0 00074 (v01 GBT AWRDACPI 42302E31 AWRD 01010101) ACPI: DSDT bfff3180 03983 (v01 GBT AWRDACPI 00001000 MSFT 0100000C) ACPI: FACS bfff0000 00040 ACPI: MCFG bfff6c40 0003C (v01 GBT AWRDACPI 42302E31 AWRD 01010101) ACPI: APIC bfff6b80 00068 (v01 GBT AWRDACPI 42302E31 AWRD 01010101) ACPI: SSDT bfff6cc0 0015C (v01 PmRef Cpu0Ist 00003000 INTL 20040311) ACPI: SSDT bfff7150 0014E (v01 PmRef CpuPm 00003000 INTL 20040311) ACPI: Local APIC address 0xfee00000 2187MB HIGHMEM available. 883MB LOWMEM available. mapped low ram: 0 - 373fe000 low ram: 0 - 373fe000 node 0 low ram: 00000000 - 373fe000 node 0 bootmap 00009000 - 0000fe80 (14 early reservations) ==> bootmem [0000000000 - 00373fe000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000100000 - 000068af74] TEXT DATA BSS ==> [0000100000 - 000068af74] #3 [000068b000 - 000068e0a2] BRK ==> [000068b000 - 000068e0a2] #4 [00000f4e20 - 0000100000] BIOS reserved ==> [00000f4e20 - 0000100000] #5 [00000f4e10 - 00000f4e20] MP-table mpf ==> [00000f4e10 - 00000f4e20] #6 [000009f800 - 00000f0d00] BIOS reserved ==> [000009f800 - 00000f0d00] #7 [00000f0e80 - 00000f4e10] BIOS reserved ==> [00000f0e80 - 00000f4e10] #8 [00000f0d00 - 00000f0e80] MP-table mpc ==> [00000f0d00 - 00000f0e80] #9 [0000002000 - 0000003000] TRAMPOLINE ==> [0000002000 - 0000003000] #10 [0000003000 - 0000007000] ACPI WAKEUP ==> [0000003000 - 0000007000] #11 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000] #12 [000068f000 - 0000cfe04f] NEW RAMDISK ==> [000068f000 - 0000cfe04f] #13 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000] Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x000373fe HighMem 0x000373fe -> 0x000bfff0 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x000bfff0 On node 0 totalpages: 786319 free_area_init_node: node 0, pgdat c0557040, node_mem_map c1001000 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3967 pages, LIFO batch:0 Normal zone: 1736 pages used for memmap Normal zone: 220470 pages, LIFO batch:31 HighMem zone: 4376 pages used for memmap HighMem zone: 555738 pages, LIFO batch:31 Using APIC driver default ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 Allocating PCI resources starting at c0000000 (gap: c0000000:30000000) Booting paravirtualized kernel on bare hardware setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 14 pages/cpu @c2c00000 s33304 r0 d24040 u2097152 pcpu-alloc: s33304 r0 d24040 u2097152 alloc=1*4194304 pcpu-alloc: [0] 0 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 780175 Kernel command line: BOOT_IMAGE=2.6.33.7-pclos6.bfs root=UUID=b69adc0e-b2f8-4002-b104-1bd6682f0fc4 resume=UUID=6d9dc4cc-07d6-41f5-8c23-7bf5cf06b314 splash=silent vga=788 pci=use_crs PID hash table entries: 4096 (order: 2, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 Initializing HighMem for node 0 (000373fe:000bfff0) Memory: 3106464k/3145664k available (2639k kernel code, 37868k reserved, 1905k data, 480k init, 2240456k highmem) virtual kernel memory layout: fixmap : 0xffd55000 - 0xfffff000 (2728 kB) pkmap : 0xff400000 - 0xff800000 (4096 kB) vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB) .init : 0xc0571000 - 0xc05e9000 ( 480 kB) .data : 0xc0393d2b - 0xc05704a8 (1905 kB) .text : 0xc0100000 - 0xc0393d2b (2639 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. NR_IRQS:1280 Console: colour dummy device 80x25 console [tty0] enabled Fast TSC calibration using PIT Detected 2992.975 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 5985.95 BogoMIPS (lpj=2992975) Security Framework initialized Mount-cache hash table entries: 512 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 4 MCE banks CPU0: Thermal monitoring enabled (TM1) using mwait in idle threads. Performance Events: no PMU driver, software events only. Checking 'hlt' instruction... OK. ACPI: Checking initramfs for custom DSDT ACPI: Core revision 20091214 ftrace: converting mcount calls to 0f 1f 44 00 00 ftrace: allocating 16230 entries in 32 pages Enabling APIC mode: Flat. Using 1 I/O APICs ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Pentium(R) D CPU 3.00GHz stepping 04 Booting Node 0, Processors #1 Initializing CPU#1 Brought up 2 CPUs Total of 2 processors activated (11970.28 BogoMIPS). devtmpfs: initialized NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xf0000000-0xffffffff] (base 0xf0000000) PCI: MMCONFIG at [mem 0xf0000000-0xffffffff] reserved in E820 PCI: MMCONFIG for 0000 [bus00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) (size reduced!) PCI: Using MMCONFIG for extended config space PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] pci_root PNP0A03:00: host bridge window [mem 0xc0000000-0xfebfffff] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:1b.0: reg 10: [mem 0xe9000000-0xe9003fff 64bit] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1d.0: reg 20: [io 0xb000-0xb01f] pci 0000:00:1d.1: reg 20: [io 0xb400-0xb41f] pci 0000:00:1d.2: reg 20: [io 0xb800-0xb81f] pci 0000:00:1d.3: reg 20: [io 0xbc00-0xbc1f] pci 0000:00:1d.7: reg 10: [mem 0xe9004000-0xe90043ff] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f) pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003] pci 0000:00:1f.1: reg 20: [io 0xf000-0xf00f] pci 0000:00:1f.2: reg 10: [io 0xd000-0xd007] pci 0000:00:1f.2: reg 14: [io 0xd400-0xd403] pci 0000:00:1f.2: reg 18: [io 0xd800-0xd807] pci 0000:00:1f.2: reg 1c: [io 0xdc00-0xdc03] pci 0000:00:1f.2: reg 20: [io 0xe000-0xe00f] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f] pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xe0ffffff] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref] pci 0000:01:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref] pci 0000:01:00.0: reg 24: [io 0x9000-0x907f] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref] pci 0000:01:00.1: reg 10: [mem 0xe2000000-0xe2003fff] pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0x9000-0x9fff] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe2ffffff] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref] pci 0000:00:1c.0: PCI bridge to [bus 02-02] pci 0000:00:1c.0: bridge window [io 0x8000-0x8fff] pci 0000:03:00.0: reg 10: [mem 0xe4000000-0xe4003fff 64bit] pci 0000:03:00.0: reg 18: [io 0xa000-0xa0ff] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] pci 0000:03:00.0: supports D1 D2 pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:03:00.0: PME# disabled pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:1c.1: PCI bridge to [bus 03-03] pci 0000:00:1c.1: bridge window [io 0xa000-0xafff] pci 0000:00:1c.1: bridge window [mem 0xe3000000-0xe4ffffff] pci 0000:04:01.0: reg 10: [mem 0xe5000000-0xe5ffffff] pci 0000:04:01.2: reg 10: [mem 0xe6000000-0xe6ffffff] pci 0000:04:01.4: reg 10: [mem 0xe7000000-0xe7ffffff] pci 0000:04:07.0: reg 10: [mem 0xe8004000-0xe80047ff] pci 0000:04:07.0: reg 14: [mem 0xe8000000-0xe8003fff] pci 0000:04:07.0: supports D1 D2 pci 0000:04:07.0: PME# supported from D0 D1 D2 D3hot pci 0000:04:07.0: PME# disabled pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0xe5000000-0xe8ffffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet clockevent registered HPET: 3 timers in total, 0 timers will be used for per-cpu timer hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 64-bit 14.318180 MHz counter Switching to clocksource tsc pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 16 devices ACPI: ACPI bus type pnp unregistered PnPBIOS: Disabled system 00:01: [io 0x04d0-0x04d1] has been reserved system 00:01: [io 0x0290-0x029f] has been reserved system 00:01: [io 0x0800-0x087f] has been reserved system 00:01: [io 0x0880-0x088f] has been reserved system 00:0c: [io 0x0400-0x04bf] could not be reserved system 00:0d: [mem 0xf0000000-0xf3ffffff] has been reserved system 00:0e: [mem 0x000f0000-0x000f3fff] could not be reserved system 00:0e: [mem 0x000f4000-0x000f7fff] could not be reserved system 00:0e: [mem 0x000f8000-0x000fbfff] could not be reserved system 00:0e: [mem 0x000fc000-0x000fffff] could not be reserved system 00:0e: [mem 0xbfff0000-0xbfffffff] could not be reserved system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved system 00:0e: [mem 0x00100000-0xbffeffff] could not be reserved system 00:0e: [mem 0xfec00000-0xfec00fff] could not be reserved system 00:0e: [mem 0xfed13000-0xfed1dfff] has been reserved system 00:0e: [mem 0xfed20000-0xfed8ffff] has been reserved system 00:0e: [mem 0xfee00000-0xfee00fff] has been reserved system 00:0e: [mem 0xffb00000-0xffb7ffff] has been reserved system 00:0e: [mem 0xfff00000-0xffffffff] has been reserved system 00:0e: [mem 0x000e0000-0x000effff] has been reserved pci 0000:00:1c.0: BAR 14: assigned [mem 0xe9100000-0xe92fffff] pci 0000:00:1c.0: BAR 15: assigned [mem 0xe9300000-0xe94fffff 64bit pref] pci 0000:00:1c.1: BAR 15: assigned [mem 0xe9500000-0xe96fffff pref] pci 0000:01:00.0: BAR 6: assigned [mem 0xd2000000-0xd207ffff pref] pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0x9000-0x9fff] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe2ffffff] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref] pci 0000:00:1c.0: PCI bridge to [bus 02-02] pci 0000:00:1c.0: bridge window [io 0x8000-0x8fff] pci 0000:00:1c.0: bridge window [mem 0xe9100000-0xe92fffff] pci 0000:00:1c.0: bridge window [mem 0xe9300000-0xe94fffff 64bit pref] pci 0000:03:00.0: BAR 6: assigned [mem 0xe9500000-0xe951ffff pref] pci 0000:00:1c.1: PCI bridge to [bus 03-03] pci 0000:00:1c.1: bridge window [io 0xa000-0xafff] pci 0000:00:1c.1: bridge window [mem 0xe3000000-0xe4ffffff] pci 0000:00:1c.1: bridge window [mem 0xe9500000-0xe96fffff pref] pci 0000:00:1e.0: PCI bridge to [bus 04-04] pci 0000:00:1e.0: bridge window [io disabled] pci 0000:00:1e.0: bridge window [mem 0xe5000000-0xe8ffffff] pci 0000:00:1e.0: bridge window [mem pref disabled] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:01.0: setting latency timer to 64 pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 [io 0x0000-0x0cf7] pci_bus 0000:00: resource 1 [io 0x0d00-0xffff] pci_bus 0000:00: resource 2 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 3 [mem 0x000c0000-0x000dffff] pci_bus 0000:00: resource 4 [mem 0xc0000000-0xfebfffff] pci_bus 0000:01: resource 0 [io 0x9000-0x9fff] pci_bus 0000:01: resource 1 [mem 0xe0000000-0xe2ffffff] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xdfffffff 64bit pref] pci_bus 0000:02: resource 0 [io 0x8000-0x8fff] pci_bus 0000:02: resource 1 [mem 0xe9100000-0xe92fffff] pci_bus 0000:02: resource 2 [mem 0xe9300000-0xe94fffff 64bit pref] pci_bus 0000:03: resource 0 [io 0xa000-0xafff] pci_bus 0000:03: resource 1 [mem 0xe3000000-0xe4ffffff] pci_bus 0000:03: resource 2 [mem 0xe9500000-0xe96fffff pref] pci_bus 0000:04: resource 1 [mem 0xe5000000-0xe8ffffff] pci_bus 0000:04: resource 3 [io 0x0000-0x0cf7] pci_bus 0000:04: resource 4 [io 0x0d00-0xffff] pci_bus 0000:04: resource 5 [mem 0x000a0000-0x000bffff] pci_bus 0000:04: resource 6 [mem 0x000c0000-0x000dffff] pci_bus 0000:04: resource 7 [mem 0xc0000000-0xfebfffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered UDP hash table entries: 512 (order: 2, 16384 bytes) UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) NET: Registered protocol family 1 pci 0000:01:00.0: Boot video device PCI: CLS 32 bytes, default 64 Trying to unpack rootfs image as initramfs... Freeing initrd memory: 6588k freed apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) apm: disabled - APM is not SMP safe. audit: initializing netlink socket (disabled) type=2000 audit(1304868734.531:1): initialized highmem bounce pool size: 64 pages HugeTLB registered 4 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) JFS: nTxBlock = 8192, nTxLock = 65536 msgmni has been set to 1706 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pcieport 0000:00:01.0: setting latency timer to 64 pcieport 0000:00:01.0: irq 24 for MSI/MSI-X pcieport 0000:00:1c.0: setting latency timer to 64 pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X pcieport 0000:00:1c.1: setting latency timer to 64 pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X vesafb: framebuffer at 0xd1000000, mapped to 0xf8100000, using 1875k, total 14336k vesafb: mode is 800x600x16, linelength=1600, pages=2 vesafb: protected mode interface info at c000:c990 vesafb: pmi: set display start = c00cc9f3, set palette = c00cca4e vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 100x37 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... Linux agpgart interface v0.103 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A brd: module loaded PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered Using IPI No-Shortcut mode input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 psmouse serio1: ID: 10 00 64 isapnp: No Plug & Play device found input: PS2++ Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input1 registered taskstats version 1 BIOS EDD facility v0.16 2004-Jun-25, 3 devices found Freeing unused kernel memory: 480k freed BFS CPU scheduler v0.357 by Con Kolivas. SCSI subsystem initialized libata version 3.00 loaded. ata_piix 0000:00:1f.1: version 2.13 ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ata_piix 0000:00:1f.1: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] ata_piix 0000:00:1f.2: setting latency timer to 64 scsi2 : ata_piix scsi3 : ata_piix ata3: SATA max UDMA/133 cmd 0xd000 ctl 0xd400 bmdma 0xe000 irq 19 ata4: SATA max UDMA/133 cmd 0xd800 ctl 0xdc00 bmdma 0xe008 irq 19 ata1.00: ATAPI: DVD RW DRU-820A, 1.0a, max UDMA/66 ata1.01: ATAPI: ATAPI CD-ROM 52XMax, VER 1.21, max UDMA/33 ata4.00: HPA detected: current 490232639, native 490234752 ata4.00: ATA-7: Maxtor 7L250S0, BANC1G10, max UDMA/133 ata4.00: 490232639 sectors, multi 16: LBA48 NCQ (not used) ata3.00: ATA-7: Maxtor 7L250S0, BANC1G10, max UDMA/133 ata3.00: 490234752 sectors, multi 16: LBA48 NCQ (not used) ata3.00: configured for UDMA/133 ata4.00: configured for UDMA/133 ata1.00: configured for UDMA/66 ata1.01: configured for UDMA/33 scsi 0:0:0:0: CD-ROM SONY DVD RW DRU-820A 1.0a PQ: 0 ANSI: 5 scsi 0:0:1:0: CD-ROM ATAPI CD-ROM 52XMax 1.21 PQ: 0 ANSI: 5 scsi 2:0:0:0: Direct-Access ATA Maxtor 7L250S0 BANC PQ: 0 ANSI: 5 sd 2:0:0:0: [sda] 490234752 512-byte logical blocks: (251 GB/233 GiB) sd 2:0:0:0: [sda] Write Protect is off sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 scsi 3:0:0:0: Direct-Access ATA Maxtor 7L250S0 BANC PQ: 0 ANSI: 5 sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 3:0:0:0: [sdb] 490232639 512-byte logical blocks: (250 GB/233 GiB) sd 3:0:0:0: [sdb] Write Protect is off sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sdb: sda1 sda2 < sdb1 sd 3:0:0:0: [sdb] Attached SCSI disk sda5 sda6 sda7 > sd 2:0:0:0: [sda] Attached SCSI disk Uniform Multi-Platform E-IDE driver ide-gd driver 1.18 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb udev: starting version 156 scsi 0:0:0:0: Attached scsi generic sg0 type 5 scsi 0:0:1:0: Attached scsi generic sg1 type 5 sd 2:0:0:0: Attached scsi generic sg2 type 0 sd 3:0:0:0: Attached scsi generic sg3 type 0 sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 0:0:0:0: Attached scsi CD-ROM sr0 sr1: scsi3-mmc drive: 0x/52x cd/rw xa/form2 cdda tray sr 0:0:1:0: Attached scsi CD-ROM sr1 input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 ACPI: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 ACPI: Power Button [PWRF] ACPI: SSDT bfff70c0 00087 (v01 PmRef Cpu1Ist 00003000 INTL 20040311) uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b000 usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: UHCI Host Controller usb usb1: Manufacturer: Linux 2.6.33.7-pclos6.bfs uhci_hcd usb usb1: SerialNumber: 0000:00:1d.0 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.33.7-pclos6.bfs uhci_hcd usb usb2: SerialNumber: 0000:00:1d.1 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b800 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.33.7-pclos6.bfs uhci_hcd usb usb3: SerialNumber: 0000:00:1d.2 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.3: setting latency timer to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000bc00 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.33.7-pclos6.bfs uhci_hcd usb usb4: SerialNumber: 0000:00:1d.3 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 ehci_hcd 0000:00:1d.7: using broken periodic workaround ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe9004000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: EHCI Host Controller usb usb5: Manufacturer: Linux 2.6.33.7-pclos6.bfs ehci_hcd usb usb5: SerialNumber: 0000:00:1d.7 hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports detected Floppy drive(s): fd0 is 1.44M rtc_cmos 00:03: RTC can wake from S4 rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, 242 bytes nvram, hpet irqs FDC 0 is a post-1991 82077 sky2 driver version 1.26 sky2 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 sky2 0000:03:00.0: setting latency timer to 64 sky2 0000:03:00.0: Yukon-2 EC chip revision 1 sky2 0000:03:00.0: irq 27 for MSI/MSI-X sky2 eth0: addr 00:0f:ea:f4:4b:1d leds_ss4200: no LED devices found IT8712 SuperIO detected. parport_pc 00:09: reported by Plug and Play ACPI parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 usb 5-5: new high speed USB device using ehci_hcd and address 2 usb 5-5: New USB device found, idVendor=0bc2, idProduct=3000 usb 5-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 5-5: Product: FreeAgentDesktop usb 5-5: Manufacturer: Seagate usb 5-5: SerialNumber: 9QF385DZ usb 5-6: new high speed USB device using ehci_hcd and address 3 usb 5-6: New USB device found, idVendor=050d, idProduct=7050 usb 5-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 5-6: Product: Belkin 54g USB Network Adapter usb 5-6: Manufacturer: Belkin ppdev: user-space parallel port driver Initializing USB Mass Storage driver... scsi4 : usb-storage 5-5:1.0 usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usb 5-8: new high speed USB device using ehci_hcd and address 5 intel_rng: FWH not detected ohci1394 0000:04:07.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1) ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[23] MMIO=[e8004000-e80047ff] Max Packet=[2048] IR/IT contexts=[4/8] usb 5-8: New USB device found, idVendor=03f0, idProduct=8e11 usb 5-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 5-8: Product: Photosmart Plus B210 series usb 5-8: Manufacturer: HP usb 5-8: SerialNumber: CN06I2M18B05J9 scsi5 : usb-storage 5-8:1.2 cfg80211: Calling CRDA to update world regulatory domain Linux video capture interface: v2.00 usblp0: USB Bidirectional printer dev 5 if 1 alt 0 proto 2 vid 0x03F0 pid 0x8E11 usbcore: registered new interface driver usblp usb 4-1: new full speed USB device using uhci_hcd and address 2 usb 4-1: New USB device found, idVendor=046d, idProduct=0840 usb 4-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 usb 4-1: Product: Camera HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 HDA Intel 0000:00:1b.0: irq 28 for MSI/MSI-X HDA Intel 0000:00:1b.0: setting latency timer to 64 cfg80211: World regulatory domain updated: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) usb 5-6: reset high speed USB device using ehci_hcd and address 3 cx88/0: cx2388x v4l2 driver version 0.0.7 loaded cx8800 0000:04:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 cx88[0]: subsystem: 0070:9002, board: Hauppauge Nova-T DVB-T [card=18,autodetected], frontend(s): 1 cx88[0]: TV tuner type 4, Radio tuner type -1 cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.7 loaded hda_codec: ALC882: BIOS auto-probing. HDA Intel 0000:01:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 hda_intel: Disable MSI for Nvidia chipset HDA Intel 0000:01:00.1: setting latency timer to 64 usb 5-6: firmware: requesting isl3887usb gspca: main v2.8.0 registered STV06xx: Probing for a stv06xx device gspca: probing 046d:0840 STV06xx: Configuring camera STV06xx: HDCS-1000/1100 sensor detected STV06xx: Initializing camera tveeprom 1-0050: Hauppauge model 90002, rev C176, serial# 58025 tveeprom 1-0050: MAC address is 00-0D-FE-00-E2-A9 tveeprom 1-0050: tuner model is Thompson DTT7592 (idx 76, type 4) tveeprom 1-0050: TV standards ATSC/DVB Digital (eeprom 0x80) tveeprom 1-0050: audio processor is None (idx 0) tveeprom 1-0050: decoder processor is CX882 (idx 25) tveeprom 1-0050: has no radio, has IR receiver, has no IR transmitter cx88[0]: hauppauge eeprom: model=90002 input: cx88 IR (Hauppauge Nova-T DVB-T as /devices/pci0000:00/0000:00:1e.0/0000:04:01.0/input/input4 cx88[0]/0: found at 0000:04:01.0, rev: 5, irq: 19, latency: 32, mmio: 0xe5000000 IRQ 19/cx88[0]: IRQF_DISABLED is not guaranteed on shared IRQs cx88[0]/0: registered device video0 [v4l2] cx88[0]/0: registered device vbi0 cx88[0]/2: cx2388x 8802 Driver Manager cx88-mpeg driver manager 0000:04:01.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19 cx88[0]/2: found at 0000:04:01.2, rev: 5, irq: 19, latency: 32, mmio: 0xe6000000 IRQ 19/cx88[0]: IRQF_DISABLED is not guaranteed on shared IRQs usb 5-6: (p54usb) cannot load firmware isl3887usb (-2)! usb 5-6: firmware: requesting isl3887usb_bare p54usb: probe of 5-6:1.0 failed with error -2 usbcore: registered new interface driver p54usb cx88/2: cx2388x dvb driver version 0.0.7 loaded cx88/2: registering cx8802 driver, type: dvb access: shared cx88[0]/2: subsystem: 0070:9002, board: Hauppauge Nova-T DVB-T [card=18] cx88[0]/2: cx2388x based DVB/ATSC card cx8802_alloc_frontends() allocating 1 frontend(s) gspca: video1 created usbcore: registered new interface driver STV06xx STV06xx: registered ieee1394: Host added: ID:BUS[0-00:1023] GUID[000fea0000f3a3ed] DVB: registering new adapter (cx88[0]) DVB: registering adapter 0 frontend 0 (Conexant CX22702 DVB-T)... phy1 -> rt73usb_init_eeprom: Error - Invalid RT chipset detected. phy1 -> rt2x00lib_probe_dev: Error - Failed to allocate device. usbcore: registered new interface driver rt73usb phy2: Selected rate control algorithm 'minstrel' Registered led device: rt2500usb-phy2::radio Registered led device: rt2500usb-phy2::quality usbcore: registered new interface driver rt2500usb NET: Registered protocol family 10 lo: Disabled Privacy Extensions fuse init (API version 7.13) ieee1394: raw1394: /dev/raw1394 device initialized nvidia: module license 'NVIDIA' taints kernel. Disabling lock debugging due to kernel taint scsi 4:0:0:0: Direct-Access Seagate FreeAgentDesktop 100D PQ: 0 ANSI: 4 sd 4:0:0:0: Attached scsi generic sg4 type 0 sd 4:0:0:0: [sdc] 625142448 512-byte logical blocks: (320 GB/298 GiB) sd 4:0:0:0: [sdc] Write Protect is off sd 4:0:0:0: [sdc] Mode Sense: 1c 00 00 00 sd 4:0:0:0: [sdc] Assuming drive cache: write through sd 4:0:0:0: [sdc] Assuming drive cache: write through sdc: sdc1 sdc2 < sdc5 > sd 4:0:0:0: [sdc] Assuming drive cache: write through sd 4:0:0:0: [sdc] Attached SCSI disk scsi 5:0:0:0: Direct-Access HP Photosmart Plus 1.00 PQ: 0 ANSI: 5 sd 5:0:0:0: Attached scsi generic sg5 type 0 sd 5:0:0:0: [sdd] Attached SCSI removable disk nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 nvidia 0000:01:00.0: setting latency timer to 64 vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem NVRM: loading NVIDIA UNIX x86 Kernel Module 260.19.44 Sun Feb 27 21:30:31 PST 2011 device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com loop: module loaded Adding 10763508k swap on /dev/sda6. Priority:-1 extents:1 across:10763508k usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: USB HID core driver cfg80211: Calling CRDA for country: GB cfg80211: Regulatory domain changed to country: GB (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) sky2 eth0: enabling interface ADDRCONF(NETDEV_UP): eth0: link is not ready ADDRCONF(NETDEV_UP): wlan0: link is not ready ADDRCONF(NETDEV_UP): wlan0: link is not ready wlan0: direct probe to AP 00:1e:74:0c:e8:fc (try 1) wlan0: direct probe responded wlan0: authenticate with AP 00:1e:74:0c:e8:fc (try 1) wlan0: authenticated wlan0: associate with AP 00:1e:74:0c:e8:fc (try 1) wlan0: RX AssocResp from 00:1e:74:0c:e8:fc (capab=0x411 status=0 aid=4) wlan0: associated ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready NET: Registered protocol family 17 vmap allocation for size 16781312 failed: use vmalloc= to increase size. NVRM: RmInitAdapter failed! (0x26:0xffffffff:1040) NVRM: rm_init_adapter(0) failed usbcore: registered new interface driver snd-usb-audio wlan0: no IPv6 routers present